Floor Standing Electrical Cabinets

Floor Standing Electrical cabinets for low voltage switchgear and controlgear assemblies are suitable for general industrial applications.

IP55 Floor Standing Electrical Cabinets

Features and Specifications

Protection: IP55 IK10

Standards (& Conformities): IEC/EN 60529, IEC/EN 62208, IEC/EN 61439, RoHS, CE, UKCA

IEC/EN 61439 Certified Test Ratings:
Rated Voltage: 400 V AC
Rated Insulation Voltage: 690 V
Rated Impulse Withstand Voltage: 8 kV
Rated Current: 630A |1600A | 4000A
Main Circuit Short-Time Current Withstand: 30kA/1sec | 40kA/1sec | 60kA/1sec
Distribution Circuit Short-Time Current Withstand: 25kA/1sec | 36kA/1sec | 50kA/1sec
Auxilliary Circuit Short-Time Current Withstand: – | 30kA | 40kA/1sec | 36kA/1sec
Neutral Circuit Short-Time Current Withstand: – | 25kA/1sec | 36kA/1sec
Protection Circuit Short-Time Current Withstand: 18kA/1sec | 25kA/1sec | 36kA/1sec
Rated Conditional Short Circuit Current: 36kA/630A, 30kA/400A | 45kA/1600A, 36kA/1250A, 36kA/1000A | 65kA/4000A, 55kA/3200A, 45kA/2500A, 40kA/2000A
Rated Frequency: 50Hz

Material:

– Main Frame: 2.0mm Galvanised Steel W Profile System
– Side, Rear & Roof Panels: 1.2mm Powder-Coated Galvanised Steel Sheet
– Front Door: 2.0mm Powder-Coated Galvanised Steel Sheet
– Mounting Plates: 2.0mm Galvanised Steel Sheet
– Seal: EPDM

Enclosure Main Frame:

The robust modular main structure is fabricated using 2.0mm galvanised steel sheet W Profile system with 20mm hole pattern.

Enclosure Door:

The robust door is fabricated using 2.0mm powder coated galvanised steel sheet and incorporates four concealed hinges. The door is designed for a 135° opening. Each door contains integral cable management rails with 20mm hole pattern, M6 earth stud and document pocket.

Enclosure Side, Rear and Roof Panels:

Removable panels are fabricated using 1.2mm powder coated galvanised steel sheet.

Enclosure Base:

Base is 100mm

Enclosure Door Seal:

High quality EPDM replaceable door seal

Enclosure Lock:

4 point locking system with key-lock swing handle.

Enclosure Device Mounting Plate:

The device mounting plate is fabricated using 2.0mm mm galvanised steel sheet, pressed to provide additional strength.

Earthing:

All panels are earthed to provide earthing continuity.

Surface Treatment:

UL approved epoxy polyester powder coated with a textured finish. 80-120 micron average thickness.
– Colour: RAL7035 (Other colours available upon request).
– Colour of Base: RAL9005 (Other colours available upon request).

Accessories & Baying Kits:

A full range of accessories are available including baying kits.

– Baying Kit to suit Freestanding Cabinets – IP-MFSBAYKIT.
– Inner Doors to suit Freestanding Cabinets.
– Shelf Kits to suit Freestanding Cabinets.
– Laptop Drawers to suit Freestanding Cabinets.
– Cover Plates & Partial Mounting Plates to suit Freestanding Cabinets.

Certificates:

IEC 60529 Degrees of protection provided by enclosures: Certificate AB-0386-T 1902.14 01/00
IEC/EN 62208 Empty Enclosures for low-voltage switchgear and controlgear assemblies: Certificate
0366932-TSE-01/01
IEC/EN61439-1, 61439-2 Low Voltage Switchgear and Controlgear Assemblies: Certificate 0406176-
TSE-02/01
CE Certificate of Compliance: Certificate SZL-21 MA 13338-1
UKCA Certificate of Compliance: Certificate SZU-22MA19560-1

Products are manufactured to Quality, Safety and Environmental standards.